Residential Roof Replacement
A worn-out roof does not fail all at once. It fails a shingle at a time, a flashing joint at a time, until a winter storm finds the weak spot and water gets in.
Metal Roofing
Long-lasting standing-seam and metal panel roofing for Central Coast homes.
30 years
Roofing experience
Since 1996
CA license #726916
10-year
Roofing warranty
No cost
On-site evaluation
Details
A metal system designed for your home
A metal roof is only as good as its installation. Cirrus Roofing Co installs standing-seam and metal panel roofing systems with proper underlayment, flashing and ventilation, so the finished roof delivers the durability, energy efficiency and fire resistance metal is known for. Panels are fitted to the home — valleys, dormers, skylights and penetrations all get the same attention as the open field of the roof.
The result is a clean, watertight system that protects the home and looks sharp from the street. Metal roofing has moved well beyond barns and commercial buildings: across Watsonville, Aptos and the Santa Cruz Mountains, homeowners are choosing standing-seam and metal panel systems because they solve the problems Central Coast weather creates. Winter storms drive rain sideways; summer sun bakes shingles brittle; salt air corrodes inferior materials. A well-installed metal roof shrugs off all three. Cirrus Roofing Co has watched roofing materials perform in this climate for 30 years, and metal is the system Humberto trusts most when a homeowner asks what he would put on his own house. Choosing a metal roof is also a design decision. Panel profiles and colors can complement a ranch-style home in Royal Oaks as easily as a contemporary build near the coast. During the estimate, Humberto walks through profile and color options with samples, explains how concealed-fastener standing-seam differs from exposed-fastener panels, and helps you weigh appearance, budget and lifespan. The goal is a roof you stop thinking about — one that quietly protects the home, season after season, backed by a 10-year warranty and a 100% satisfaction warranty.
“Humberto personally evaluates the roof, explains what it needs, and puts the scope in writing before work begins.”
Included
Metal roofing expertise from ridge to eave
The scope is built around panel performance, weatherproof transitions and a precise architectural finish.
Metal Roof Installation
New standing-seam or exposed-fastener systems fitted to the roof geometry.
Metal Roof Replacement
Full tear-off and metal system replacement with deck preparation.
Metal Roof Repair
Targeted panel, seam and flashing repairs that preserve the existing system.
How it works
From panel selection to a watertight finish
Profile, finish, ventilation and flashing are resolved before fabrication and installation begin.
Step 01
Contact & Evaluation
Call (408) 670-3199 or send the estimate form. Humberto schedules a roof evaluation at a time that works for you.
Step 02
Roof Assessment
The existing roof is inspected closely — decking, flashing, ventilation and drainage — to see what a metal system needs to perform.
Step 03
Recommendation & Estimate
You get a clear recommendation between standing-seam and metal panel options, with project details and a written estimate.
Step 04
Installation & Warranty
Once approved, the crew prepares the property, completes the installation to standard, and hands over the finished roof with warranty coverage.
Why homeowners trust us
Why homeowners choose Cirrus for metal roofing
Built to last for decades
Metal roofing routinely outlasts composition shingles by a wide margin. Installed correctly, a metal roof is often the last roof a home needs, which is why Humberto recommends it for homeowners planning to stay put.
Lower cooling loads in summer
Metal reflects a large share of the sun's heat instead of absorbing it. Homes in Watsonville, Gilroy and the inland valleys stay noticeably cooler upstairs, and air conditioners run less on hot afternoons.
Fire resistance for California
Metal is a non-combustible roofing material. For homes near open hillsides around Royal Oaks, Corralitos and the Santa Cruz Mountains, that extra layer of fire protection matters more every fire season.
Pricing & investment
What shapes the cost of metal roofing?
Metal roofing costs more up front than composition shingles and pays it back in lifespan, energy savings and low maintenance. The honest price depends on roof size, pitch, panel profile and the condition of the deck underneath, so Cirrus Roofing Co does not quote metal roofs sight unseen. Every project starts with a free evaluation and a written estimate that lays out the full scope before you commit to anything.
Roof geometry
Panel profile
Metal finish
Deck preparation
Know the scope before you decide
Your evaluation includes a clear written estimate, realistic timeline and warranty details.
Reviews
Trusted for careful, long-lasting metal work
“Cirrus Roofing did work for me 21 years ago. Took off the old roof, repaired some water damage, put on a new roof, new gutters and downspouts. They did a great job, all for a reasonable price. Best of all, after all these years, the roof still looks practically like new.”
“Humberto is a professional, knowledgeable, outgoing, great person. He replaced our 1,800 square foot roof with beautiful, high quality shingles.”
“Punctuality, quality, professionalism and value.”
Service area
Metal Roofing across the Central Coast
Based in 3000 King Hall Rd, Watsonville, CA 95076, we serve homes throughout Royal Oaks, CA and surrounding communities.
- Royal Oaks
- Watsonville
- Salinas
- Santa Cruz
- Gilroy
- Morgan Hill
- Aptos
- Capitola
- Soquel
- Corralitos
- Freedom
- Prunedale
- Castroville
- Marina
- Hollister
Common questions
Metal Roofing questions, answered plainly
Clear answers before you invite anyone onto your roof.
More Services
Explore related roofing services
One trusted crew for the roof systems that protect your home.
Roof Repair & Maintenance
A small leak is never small for long. Water that gets past the roof travels along rafters and decking, and by the time a stain shows on the ceiling, the damage above it has usually spread.
Gutters
Gutters are easy to ignore until they fail — and then the damage shows up fast: water sheeting off the roof edge, pooling at the foundation, staining siding, rotting fascia and flooding planting beds.
Ready for a clear answer?
